Technical Details & Specifications
Kit Components
Ember Orange LED bulb and cable socket assembly
FEC1 Flicker Effects Control
BHC1-8AA-12V battery holder with clip and DC barrel connector
Battery holder accommodates eight AA batteries (batteries not included)
Ember Orange LED Bulb
LED Configuration: 24 LEDs (12 red and 12 yellow)
Light Output: 19 lumens nominal
Average Correlated Color Temperature (CCT): 1,000K
Operating Voltage: 12V DC nominal
Operating Current: 80mA nominal
Power Consumption: Approximately 1 watt
Bulb Style: G4-style silicone bi-pin LED bulb
Light Mixing: Optically clear molded silicone body with refractive light mixing
Color Characteristics: Polychromatic orange light output
Flicker Effects Control (FEC1)
Six selectable preset dynamic flicker and surge-fade effects
Ten adjustable speed levels for dynamic effects
Static dimming mode with 10 adjustment steps
Dynamic effects include medium/low flicker, medium/high flicker, low/high flicker, and medium/high surge-fade effects
Retains the last operating settings when powered off
Power Requirements
Operating Voltage: 12V DC
Battery Power: Eight AA alkaline batteries (not included)
Battery Runtime: More than 12 hours with new alkaline batteries under specified operating conditions
External Power Input: 12V DC
DC Connector: 2.1mm × 5.5mm barrel connector, center positive
Installation
Cable socket assembly designed for press-fit installation
Recommended mounting hole: 7/16 inch
Suitable for installation into rigid foam, wood, and other scenic construction materials
Tapered socket body provides friction retention, while the front flange limits insertion depth and provides a finished appearance
Lighting Effect and Integration
The Ember Orange LED bulb is best used for reflected or diffused cast light rather than direct viewing of the LED bulb.
A white diffuse reflector can be used to improve color mixing and distribute soft simulated firelight.
Clear silicone rubber glass or similar light-diffusing scenic materials can be used to create a glowing ember appearance.
Standard theatrical filter gels can be used to shift the orange output toward either the yellow or red portion of the spectrum.