FEC1 Flicker Effects Control – LED Lighting Flame, Fire, and Ember Simulation, For Props and Scenery, 6 flicker modes and 10 speeds

$9.99

LED Flicker Control with 6 modes for Led Lighting Flame, Fire and Ember simulation, 5, 9, 12, 24 volts DC, 18 watts maximum, DC barrel connector power input and output

20 in stock (can be backordered)

Description

The Prop and Scenery Lights Flicker Effects Control (FEC) has 6 dynamic effects modes and one static dimming mode. The FEC is intended for simulation of flame and ember sources such as candles, lanterns, oil lamps, fires, coals and wood embers. Each of the 6 modes is distinguished by the average light level, the maximum depth of the flicker trough, and a different flicker pattern. Modes with the softest flicker appearance have lower flicker trough depth (to 70%). Modes of greatest flicker appearance will have greater flicker troughs, 80% to 90% maximum. All dynamic modes have 10 speed steps. (step #1 fast – flame flicker) to (step #10 slow – ember glow ).

 

Mode # Average Light Level Flicker Trough – Depth Max. Ref. Application
1 flicker med – low 68.5% 60% candle / lantern
2 flicker med – hi 60.0% 70% candle / lantern
3 flicker – low 82.5% 50% candle / lantern
4 flicker – hi 62.0% 80% fire / ember (*)
5 surge fade – med 75.5% 80% fire / ember (*)
6 surge fade – hi 62.0% 90% fire / ember (*)
7 static dimming 0% to 100% N/A dimming

 

(*) For fire simulation it is best to use fill and flicker light using multiple FECs and light sources. Fill light is typically a complementary light that provides an increased level of ambient light and moderates the depth of the flicker trough. The FEC is capable of a very slow rate of change in all the modes to provide fill light with more of a surging and fading glow appearance than a flicker.

 

For more dynamic or a faster flicker appearance multiple FECs, in different modes and (or) speeds may be used with multiple LED light sources. For burning coal and ember glow simulation the slower speeds (6-10) of the FEC may be used in any of the modes.

The FEC is for use with LED light sources only. Input voltage 5.0 – 24 volts DC LED Lighting Systems, 1.5 amp Max. at 5-12 volts and 0.75 amp Max. at 24 volts, 18 watts Max. The FEC retains the last setting when turned off or disconnected.

 

The FEC has 3 tactile buttons:

  1. Mode: (6 total dynamic, one static)
  2. Speed – On/Off: (10 speed steps, and 12 steps of dimming, 3 second hold for On/Off)
  3. Light: used to change to static dimming mode only (10%-95% dimming range 12 steps via the Speed- On/Off button)
  • Themed entertainment and dark rides
  • Theatrical and decor candles and torches
  • Vintage lantern and oil lamp replicas
  • Faux fireplaces and glowing coal and embers
  • Props and stage scenery fire simulation
  • Rustic lantern props
  • Theatrical performing arts projects
  • Escape room props

Use with out ember orange LED light and other flame spectrum lights.

Ember Orange LED light

 FEC1 Rev_C Spec Sheet (07_15_17)

FEC1 Flicker effects Control Ap Note Rev-B PSL (7_31_17)

Additional information

Weight 3 oz
Dimensions 7 × 4 × 1 in