Blacklight 3 Head Micro Special Effects Kit 12v 9v Dc for Props Fluorescent Paints Pigments Fabric Plastics Theatrical Costumes

$16.99

3 head miniature blacklight 405nm LEDs spotlight provides glow to fluorescent paints and materials in dark settings. Each of 3 light heads has an overall length of six inches from the 3-way cable splitter. Dual voltage, 12-volts DC or 9-volts DC. Uses include building of props and scenery where a small black light source is needed.

12 in stock

SKU: MEL-BL-3-KIT-1 Categories: ,

Description

This kit consists of three Micro Effects Lights, Blacklights with 405nm light output in a narrow beam pattern, a 3-way Pigtail Connector Splitter, and a 12-volt battery holder. This unit is a blacklight source in the UVA ultraviolet region at 405nm for building props, scenery and costumes. The LED blacklights can operate from a 12-volts DC or 9-volts DC power supply. Power at 12-volts DC is 84ma nominal current, 1.0 watts. The kit can also operates from 8 AA batteries, and runs for more than 18 hours (24 hours typical) on new alkaline batteries. The kit may also be operated from 9V by unsnapping the 9V battery clip from the top of the 8 AA battery holder. When operated from a new 9V alkaline battery, the operating time can be expected to be about 3 hours typical.

The effective range of illumination of fluorescent materials in dark settings is typically 6 inches to 6 feet. Best range is achieved when operating from 12-volts DC. The Micro Effects Light heads are 1.42 inch nominal in length and 0.48 inch nominal in diameter. The entire length of the 3-way splitter and lights is 14 inch. The overall length of the of the entire assembly is 24 inch. The 3-way cable splitter and lights use 2.1mmm x 5.5mm size DC barrel connectors, with center positive polarity. Batteries are not included, power supply not included.

Spec. Sheet:

MEL-BL-3-KIT-1 3-way Blacklight MEL-BL Kit PSL Spec Sheet Rev A (04_20_20)